Specifications

Startup and General Configuration Summary
Setting Basic Device Properties
SecureStack B2 Configuration Guide 2-61
2.1.12.18 set system contact
Use this command to identify a contact person for the system.
set system contact [string]
Syntax Description
Command Defaults
If string is not specified, the contact name will be cleared.
Command Mode
Read-Write.
Example
This example shows how to set the system contact string:
string (Optional) Specifies a text string that contains the name
of the person to contact for system administration.
NOTE: A contact string containing a space in the
text must be enclosed in quotes as shown in the
example below.
B2(rw)->set system contact “Joe Smith”