Specifications

Startup and General Configuration Summary
Setting Basic Device Properties
SecureStack B2 Configuration Guide 2-57
2.1.12.14 set prompt
Use this command to modify the command prompt.
set prompt “prompt_string”
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to set the command prompt to Switch 1:
prompt_string Specifies a text string for the command prompt.
NOTE: A prompt string containing a space in the
text must be enclosed in quotes as shown in the
example below.
B2(rw)->set prompt “Switch 1”
Switch 1(rw)->