Specifications

Startup and General Configuration Summary
Setting Basic Device Properties
SecureStack B2 Configuration Guide 2-41
2.1.12 Setting Basic Device Properties
Purpose
To display and set the system IP address and other basic system (device) properties, including time,
contact name and version information.
Commands
The commands used to set basic system information are listed below and described in the associated
section as shown.
• show ip address (Section 2.1.12.1)
• show ip protocol (Section 2.1.12.2)
• set ip address (Section 2.1.12.3)
• show system (Section 2.1.12.4)
• show system hardware (Section 2.1.12.5)
• set system enhancedbuffermode (Section 2.1.12.6)
• show time (Section 2.1.12.7)
• set time (Section 2.1.12.8)
• show summertime (Section 2.1.12.9)
• set summertime (Section 2.1.12.10)
• set summertime date (Section 2.1.12.11)
• set summertime recurring (Section 2.1.12.12)
• clear summertime (Section 2.1.12.13)
• set prompt (Section 2.1.12.14)
• show version (Section 2.1.12.15)
• set system name (Section 2.1.12.16)
• set system location (Section 2.1.12.17)
• set system contact (Section 2.1.12.18)
• set length (Section 2.1.12.19)
• show logout (Section 2.1.12.20)