Specifications

Startup and General Configuration Summary
General Configuration Command Set
2-28 SecureStack B2 Configuration Guide
2.1.10.12 set snmp persistmode
Use this command to set the configuration persistence mode, which determines whether
user-defined configuration changes are saved automatically, or require issuing the save config
command.
set snmp persistmode {auto | manual}
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to set the configuration persistence mode to manual:
auto Sets the configuration persistence mode to automatic.
manual Sets the configuration persistence mode to manual. In
order to make configuration changes persistent, the save
config command must be issued as described in
Section 2.1.10.13. This mode is useful for reverting back
to old configurations.
B2(su)->set snmp persistmade manual