Specifications
Startup and General Configuration Summary
General Configuration Command Set
SecureStack B2 Configuration Guide 2-27
2.1.10.11 show snmp persistmode
Use this command to display the configuration persistence mode setting. By default, the mode is
set to “auto save,” which automatically saves configuration changes at the time they are applied.
show snmp persistmode
Syntax Description
None.
Command Defaults
None.
Command Mode
Read-Only.
Example
This example shows how to display the configuration persistence mode setting. In this case,
persistence mode is set to “manual”, which means configuration changes are not being
automatically saved. In order to make configuration changes persistent, the save config command
must be issued as described in Section 2.1.10.13:
B2(su)->show snmp persistmode
persistmode is manual