Specifications

Startup and General Configuration Summary
General Configuration Command Set
2-22 SecureStack B2 Configuration Guide
2.1.10.6 set switch copy-sw
Use this command to replicate the code image file from the management switch to other switch(es)
in the stack.
set switch copy-sw [destination-system unit]
Syntax Description
Command Defaults
If destination-system is not specified, the management image file will be
replicated to all switches in the stack.
Command Mode
Read-Write.
Example
This example shows how to replicate the management image file to all switches in the stack:
destination-system
unit
(Optional) Specifies the unit number of unit on which to
copy the management image file.
B2(rw)->set switch copy-sw
Are you sure you want to copy firmware? (y/n) y
Code transfer completed successfully.