Specifications

Security Configuration Command Set
Configuring MAC Locking
SecureStack B2 Configuration Guide 11-43
11.3.4.6 clear maclock firstarrival
Use this command to reset the number of first arrival MAC addresses allowed per port to the default
value of 600.
clear maclock firstarrival port-string
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to reset MAC first arrivals on fe.2.3:
port_string Specifies the port on which to reset the first arrival value.
For a detailed description of possible port_string values,
refer to Section 3.1.1.
B2(rw)->clear maclock firstarrival fe.2.3 6