Specifications

Security Configuration Command Set
Configuring MAC Locking
11-40 SecureStack B2 Configuration Guide
11.3.4.3 set maclock enable
Use this command to enable MAC locking on one or more ports. When enabled and configured for
a specific MAC address and port string, this locks a port so that only one end station address is
allowed to participate in frame relay.
set maclock enable [port_string]
Syntax Description
Command Defaults
If port_string is not specified, MAC locking will be enabled on all ports.
Command Mode
Read-Write.
Example
This example shows how to enable MAC locking on fe.2.3:
port_string (Optional) Enables MAC locking on specific port(s). For
a detailed description of possible port_string values, refer
to Section 3.1.1.
B2(rw)->set maclock enable fe.2.3