Specifications

Security Configuration Command Set
Configuring MAC Locking
11-38 SecureStack B2 Configuration Guide
11.3.4.2 show maclock stations
Use this command to display MAC locking information about end stations connected to the device.
show maclock stations [port-string]
Syntax Description
Command Defaults
If port-string is not specified, MAC locking information will be displayed for all
end stations.
Command Mode
Read-Only.
Example
This example shows how to display MAC locking information for the end stations connected to all
Fast Ethernet ports in unit 2:
Table 11-5 provides an explanation of the command output.
port_string (Optional) Displays end station information for specified
port(s). For a detailed description of possible port_string
values, refer to Section 3.1.1.
B2(rw)->show maclock stations fe.2.*
Port Number MAC Address Status State
------------ ----------------- -------------- --------------
fe.2.3 00-10-a4-e5-08-4e active first learned
fe.2.3 08-00-20-7c-e0-db active first learned
fe.2.6 00-60-08-14-4b-15 active first learned
fe.2.6 08-00-20-20-32-4b active first learned
fe.2.9 08-00-20-77-aa-80 active first learned
fe.2.12 00-03-ba-08-4c-f0 active first learned
fe.2.14 00-01-f4-2c-ad-b4 active first learned