Specifications

Security Configuration Command Set
Configuring MAC Locking
11-36 SecureStack B2 Configuration Guide
11.3.4.1 show maclock
Use this command to display the status of MAC locking on one or more ports.
show maclock [port_string]
Syntax Description
Command Defaults
If port_string is not specified, MAC locking status will be displayed for all ports.
Command Mode
Read-Only.
Example
This example shows how to display MAC locking information for ge.2.1 through 5:
Table 11-4 provides an explanation of the command output.
port_string (Optional) Displays MAC locking status for specified
port(s). For a detailed description of possible port_string
values, refer to Section 3.1.1.
B2(rw)->show maclock ge.2.1-5
MAC locking is globally enabled.
Port Port Trap Max FirstArrival Violating
Number Status Status Allocated MAC Address
-------- -------- -------- ---------------- -----------------
ge.2.1 disabled disabled 600 00:00:00:00:00:00
ge.2.2 disabled disabled 600 00:00:00:00:00:00
ge.2.3 disabled disabled 600 00:00:00:00:00:00
ge.2.4 disabled disabled 600 00:00:00:00:00:00
ge.2.5 disabled disabled 600 00:00:00:00:00:00