Specifications

Startup and General Configuration Summary
General Configuration Command Set
SecureStack B2 Configuration Guide 2-17
2.1.10.2 show switch
Use this command to display information about one or more units in the stack.
show switch [status] [unit]
Syntax Description
Command Defaults
If not specified, status and other configuration information about all units will be
displayed.
Command Mode
Read-Only.
Examples
This example shows how to display information about all switch units in the stack:
status (Optional) Displays power and administrative status
information for one or more units in the stack.
unit (Optional) Specifies the unit(s) for which information
will display.
B2(rw)->show switch
Management Preconfig Plugged-in Switch Code
Switch Status Model ID Model ID Status Version
------ ------------ ------------- ------------- --------------------- --------
1 Mgmt Switch B2G124-24 OK 0.2.00.25
2 Stack Member B2G124-24 OK 0.2.00.25
3 Stack Member B2G124-24 OK 0.2.00.25
4 Stack Member B2G124-24 OK 0.2.00.25
5 Stack Member B2G124-24 OK 0.2.00.25
6 Stack Member B2G124-24 OK 0.2.00.25
7 Stack Member B2G124-24 OK 0.2.00.25
8 Stack Member B2G124-24 OK 0.2.00.25