Specifications

Security Configuration Command Set
Configuring VLAN Authorization (RFC 3580)
SecureStack B2 Configuration Guide 11-33
11.3.3.4 show vlanauthorization
Displays the vlan authentication status and configuration information for the specified ports.
show vlanauthorization [port_str]
Syntax Description
Command Mode
Read-Only.
Command Defaults
If no port string is entered, the status for all ports will be displayed.
Example
This command shows how to display vlanauthorization status for fast ethernet port 1 on unit 1.
Table 11-3 provides an explanation of command output. For details on using the
set vlanauthorization command to enable and assign protocol and egress attributes,
refer to sections Section 11.3.3.1 and Section 11.3.3.2.
port_str (Optional) Displays vlan authentication status for the
specified ports. If no port string is entered, then the global
status of the setting is displayed. For a detailed
description of possible port-string values, refer to
Section 3.1.1.
B2(rw)-> show vlanauthorization fe.1.1
port status administrative egress operational egress vlan id
----- ------- ------------------------- --------------------- --------
fe.1.1 enabled untagged none 0
Table 11-3 show vlanauthorization Output Details
Output What It Displays...
port Port identification
status Port status as assigned by set vlanauthorization command
administrative
egress
Port status as assigned by the set vlanauthorization egress
command