Specifications

Security Configuration Command Set
Configuring VLAN Authorization (RFC 3580)
SecureStack B2 Configuration Guide 11-31
11.3.3.2 set vlanauthorization egress
Controls the modification of the current vlan egresslist of 802.1x authenticated port for the vlan(s)
returned in the RADIUS authorization filter id string.
set vlanauthorization egress [ none | tagged | untagged ] [port_str]
Syntax Description
Command Mode
Read-Write.
Command Default
None.
Example
This example shows how to enable the insertion of the RADIUS assigned VLAN to an 802.1q tag
for all outbound frames for ports 10 thru 15 on unit number 3.
none No egress manipulation will be made.
tagged The authenticating port will be added to the current
egress for the VLAN-ID returned.
untagged The authenticating port will be added to the current
untagged egress for the VLAN-ID returned (default).
port_str The port or list of ports. to which this command will
apply. For a detailed description of possible port-string
values, refer to Section 3.1.1.
set vlanauthorization egress tagged ge.3.10-15