Specifications

Security Configuration Command Set
Configuring 802.1X Authentication
11-28 SecureStack B2 Configuration Guide
11.3.2.8 clear eapol
Use this command to globally clear the EAPOL authentication mode, or to clear settings for one or
more ports.
clear eapol [auth-mode] [port-string]
Syntax Description
Command Mode
Read-Write.
Command Defaults
• If auth-mode is not specified, all EAPOL settings will be cleared.
• If not specified, settings will be cleared for all ports.
Example
This example shows how to clear the EAPOL authentication mode:
auth-mode (Optional) Globally clears the EAPOL authentication mode.
port_string (Optional) Specifies the port(s) on which to clear EAPOL
parameters. For a detailed description of possible
port_string values, refer to Section 3.1.1.
B2(rw)->clear eapol auth-mode