Specifications

Security Configuration Command Set
Configuring 802.1X Authentication
11-24 SecureStack B2 Configuration Guide
11.3.2.6 show eapol
Use this command to display EAPOL status or settings for one or more ports.
show eapol [port_string]
Syntax Description
Command Mode
Read-Only.
Command Defaults
If port_string is not specified, only EAPOL enable status will be displayed.
Example
This example shows how to display EAPOL status for ports fe.1.1-3:
Table 11-2 provides an explanation of the command output. For details on using
the set eapol command to enable the protocol and assign an authentication mode,
refer to Section 11.3.2.7.
port_string (Optional) Displays EAPOL status for specific port(s). For
a detailed description of possible port_string values, refer
to Section 3.1.1.
B2(rw)->show eapol fe.1.1-3
EAPOL is disabled.
Port Authentication State Authentication Mode
-------- -------------------- --------------------
fe.1.1 Initialized Auto
fe.1.2 Initialized Auto
fe.1.3 Initialized Auto
Table 11-2 show eapol Output Details
Output What It Displays...
Port Port designation. For a detailed description of possible
port_string values, refer to Section 3.1.1.