Specifications

Security Configuration Command Set
Configuring 802.1X Authentication
SecureStack B2 Configuration Guide 11-23
Examples
This example shows how to reset the 802.1X port control mode to auto on all ports:
This example shows how to reset reauthentication control to disabled on ports fe.1.1-3:
This example shows how to reset the 802.1X quiet period to 60 seconds on ports fe.1.1-3:
B2(rw)->clear dot1x auth-config authcontrolled-portcontrol
B2(rw)->clear dot1x auth-config reauthenabled fe.1.1-3
B2(rw)->clear dot1x auth-config quietperiod fe.1.1-3