Specifications

Security Configuration Command Set
Configuring 802.1X Authentication
SecureStack B2 Configuration Guide 11-19
11.3.2.3 set dot1x
Use this command to enable or disable 802.1X authentication, to reauthenticate one or more access
entities, or to reinitialize one or more supplicants.
set dot1x port {[enable | disable] [init | reauth {true | false} [port-string]]}
Syntax Description
Command Mode
Read-Write.
Command Defaults
If not specified, the reinitialization or reauthentication setting will be applied to all
ports.
Examples
This example shows how to enable 802.1X:
This example shows how to reinitialize fe.2.24:
enable | disable Enables or disables 802.1X.
init | reauth Reinitializes one or more access entities or reauthenticates
one or more supplicants.
port-string (Optional) Specifies the port(s) to reinitialize or
reauthenticate.
true | false Enables (true) or disables reinitialization/reauthentication.
B2(rw)->set dot1x enable
B2(rw)->set dot1x port init fe.2.24 true