Specifications

Security Configuration Command Set
Configuring 802.1X Authentication
SecureStack B2 Configuration Guide 11-15
This example shows how to display authentication diagnostics information for fe.1.1:
This example shows how to display authentication statistics for fe.1.1:
B2(rw)->show dot1x auth-diag fe.1.1
Port: 1 Auth-Diag:
Enter Connecting: 0
EAP Logoffs While Connecting: 0
Enter Authenticating: 0
Success While Authenticating: 0
Timeouts While Authenticating: 0
Fail While Authenticating: 0
ReAuths While Authenticating: 0
EAP Starts While Authenticating: 0
EAP Logoff While Authenticating: 0
ReAuths While Authenticated: 0
EAP Starts While Authenticated: 0
EAP Logoff While Authenticated: 0
Backend Responses: 0
Backend Access Challenges: 0
Backend Other Requests To Supp: 0
Backend NonNak Responses From Supp: 0
Backend Auth Successes: 0
Backend Auth Fails: 0
B2(rw)->show dot1x auth-stats fe.1.1
Port: 1 Auth-Stats:
EAPOL Frames Rx: 0
EAPOL Frames Tx: 0
EAPOL Start Frames Rx: 0
EAPOL Logoff Frames Rx: 0
EAPOL RespId Frames Rx: 0
EAPOL Resp Frames Rx: 0
EAPOL ReqId Frames Tx: 0
EAPOL Req Frames Tx: 0
Invalid EAPOL Frames Rx: 0
EAP Length Error Frames Rx: 0
Last EAPOL Frame Version: 0
Last EAPOL Frame Source: 0:0:0:0:0:0