Specifications

Security Configuration Command Set
Configuring 802.1X Authentication
SecureStack B2 Configuration Guide 11-13
11.3.2 Configuring 802.1X Authentication
Purpose
To review and configure 802.1X authentication for one or more ports using EAPOL (Extensible
Authentication Protocol). 802.1X controls network access by enforcing user authorization on
selected ports, which results in allowing or denying network access according to RADIUS server
configuration.
Commands
The commands used to review and configure 802.1X are listed below and described in the
associated section as shown:
• show dot1x (Section 11.3.2.1)
• show dot1x auth-config (Section 11.3.2.2)
• set dot1x (Section 11.3.2.3)
• set dot1x auth-config (Section 11.3.2.4)
• clear dot1x auth-config (Section 11.3.2.5)
• show eapol (Section 11.3.2.6)
• set eapol (Section 11.3.2.7)
• clear eapol (Section 11.3.2.8)
NOTE: One user per EAPOL-configured port can be authenticated on SecureStack B2
devices.