Specifications

Security Configuration Command Set
Configuring RADIUS
SecureStack B2 Configuration Guide 11-11
Examples
This example shows how to enable the RADIUS accounting client for authenticating with the
accounting server at IP address 10.2.4.12, UDP authentication port 1800. As previously noted, the
“server secret” password entered here must match that already configured as the Read-Write (rw)
password on the RADIUS accounting server
:
This example shows how to set the RADIUS accounting timeout to 30 seconds on server 6:
This example shows how to set RADIUS accounting retries to 10 on server 6:
B2(rw)->set radius accounting server 10.2.4.12 1800
Server Secret:******
Retype Server Secret:******
Make This Entry Active (y/n)? y
Warning: rfc 2138 recommends secret minimum length of 16
B2(rw)->set radius accounting timeout 30 6
B2(rw)->set radius accounting retries 10 6