Specifications

Security Configuration Command Set
Configuring RADIUS
SecureStack B2 Configuration Guide 11-5
Table 11-1 show radius Output Details
Output What It Displays...
RADIUS status Whether RADIUS is enabled or disabled.
RADIUS retries Number of retry attempts before the RADIUS server times
out. The default value of 3 can be reset using the set radius
command as described in Section 11.3.1.2.
RADIUS timeout Maximum amount of time (in seconds) to establish contact
with the RADIUS server before retry attempts begin. The
default value of 20 can be reset using the set radius
command as described in Section 11.3.1.2.
RADIUS Server IP address, and UDP authentication port.