Specifications

Logging And Network Management Command Set
Configuring Node Aliases
SecureStack B2 Configuration Guide 10-43
10.2.5 Configuring Node Aliases
Purpose
To review, configure, disable and re-enable node (port) alias functionality, which determines what
network protocols are running on one or more ports.
Commands
Commands to configure node aliases are listed below and described in the associated section as
shown.
• show nodealias config (Section 10.2.5.1)
• set nodealias (Section 10.2.5.2)
• clear nodealias config (Section 10.2.5.3)