Specifications

Logging And Network Management Command Set
Configuring Simple Network Time Protocol (SNTP)
SecureStack B2 Configuration Guide 10-35
10.2.4.6 set sntp broadcastdelay
Use this command to set the round trip delay, in microseconds, for SNTP broadcast frames.
set sntp broadcastdelay time
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to set the SNTP broadcast delay to 12000 microseconds
:
time Specifies broadcast delay time in microseconds. Valid
values are 1 to 999999. Default value is 3000.
B2(rw)->set sntp broadcastdelay 12000