Specifications
Logging And Network Management Command Set
Managing Switch Network Addresses and Routes
SecureStack B2 Configuration Guide 10-25
10.2.3.3 show mac
Use this command to display MAC addresses in the switch’s filtering database. These are addresses
learned on a port through the switching process.
show mac [address mac-address] [fid fid] [port port-string] [type {other |
invalid | learned | self | mgmt}
Syntax Description
Command Defaults
If no parameters are specified, all MAC addresses for the device will be displayed.
Command Mode
Read-Only.
address
mac-address
(Optional) Displays a specific MAC address (if it is known
by the device).
fid fid (Optional) Displays MAC addresses for a specific filter
database identifier.
port port-string (Optional) Displays MAC addresses for specific port(s).
For a detailed description of possible port-string values,
refer to Section 3.1.1.
type other |
invalid | learned |
self | mgmt
(Optional) Displays information related to other, invalid,
learned, self or mgmt (management) address type.