Specifications

Logging And Network Management Command Set
Configuring System Logging
10-10 SecureStack B2 Configuration Guide
10.2.1.7 show logging local
Use this command to display the state of message logging to the console and a persistent file.
show logging local
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display the state of message logging. In this case, logging to the console
is enabled and logging to a persistent file is disabled.
B2(rw)->show logging local
Syslog Console Logging enabled
Syslog File Logging disabled