Specifications

Startup and General Configuration Summary
Getting Help with CLI Syntax
2-10 SecureStack B2 Configuration Guide
Entering a question mark (?) without a space after a partial keyword will display a list of commands
that begin with the partial keyword. Figure 2-4 shows how to use this function for all commands
beginning with co:
Figure 2-4 Performing a Partial Keyword Lookup
2.1.7.2 Displaying Scrolling Screens
If the CLI screen length has been set using the set length command as described in
Section 2.1.12.19, CLI output requiring more than one screen will display
--More-- to indicate
continuing screens. To display additional screen output:
• Press any key other than ENTER to advance the output one screen at a time.
• Press ENTER to advance the output one line at a time.
The example in Figure 2-5 shows how the show mac address command indicates that output
continues on more than one screen.
Figure 2-5 Scrolling Screen Output
B2(rw->co?
configure copy
B2(rw)->co
NOTE: At the end of the lookup display, the system will repeat the command you entered
without the ?.
B2(rw)->show macaddress
MAC Address FID Port Type
----------------------------------------------------------
00-00-1d-67-68-69 1 host.0.1 learned
00-00-02-00-00-00 1 fe.1.2 learned
00-00-02-00-00-01 1 fe.1.3 learned
00-00-02-00-00-02 1 fe.1.4 learned
00-00-02-00-00-03 1 fe.1.5 learned
00-00-02-00-00-04 1 fe.1.6 learned
00-00-02-00-00-05 1 fe.1.7 learned
00-00-02-00-00-06 1 fe.1.8 learned
00-00-02-00-00-07 1 fe.1.9 learned
00-00-02-00-00-08 1 fe.1.10 learned
--More--