Specifications

Logging And Network Management Command Set
Configuring System Logging
SecureStack B2 Configuration Guide 10-7
10.2.1.4 show logging default
Use this command to display the Syslog server default values.
show logging default
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This command shows how to display the Syslog server default values. For an explanation of the
command output, refer back to Table 10-1.
B2(rw)->show logging default
Facility Severity Port
-----------------------------------------
Defaults: local4 warning(5) 514