Specifications

Logging And Network Management Command Set
Configuring System Logging
10-2 SecureStack B2 Configuration Guide
10.2 LOGGING AND NETWORK MANAGEMENT COMMAND SET
10.2.1 Configuring System Logging
Purpose
To display and configure system logging, including Syslog server settings, logging severity levels
for various applications, Syslog default settings, and the logging buffer.
Commands
Commands to configure system logging are listed below and described in the associated section as
shown.
• show logging server (Section 10.2.1.1)
• set logging server (Section 10.2.1.2)
• clear logging server (Section 10.2.1.3)
• show logging default (Section 10.2.1.4)
• set logging default (Section 10.2.1.5)
• clear logging default (Section 10.2.1.6)
• show logging local (Section 10.2.1.7)
• set logging local (Section 10.2.1.8)
• clear logging local (Section 10.2.1.9)
• show logging buffer (Section 10.2.1.10)