Specifications

IGMP Configuration Command Set
Configuring IGMP
SecureStack B2 Configuration Guide 9-9
9.4.2.3 set igmpsnooping mcrtrexpiretime
Use this command to configure the IGMP multicast router expiration time for the system. This timer
is for expiring the switch from the multicast database. If the timer expires, and the only address left
is the multicast switch, then the entry will be removed.
set igmpsnooping mcrtrexpire time
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to set the IGMP multicast router expiration time to infinity:
time Specifies the IGMP multicast router expiration time. Valid
values are 0 - 3600 seconds. A value of 0 will configure the
system with an infinite expiration time.
B2(rw)->set igmpsnooping mcrtrexpiretime 0