Specifications

Port Priority and Rate Limiting Configuration Command Set
Configuring Priority to Transmit Queue Mapping
SecureStack B2 Configuration Guide 8-7
8.3.2.1 show port priority-queue
Use this command to display the port priority levels (0 through 7, with 0 as the lowest level)
associated with the current transmit queue (0 - 15 depending on port type, with 0 being the lowest
priority) for each priority of the selected port. A frame with a certain port priority is transmitted
according to the settings entered using the set priority queue command described in
Section 8.3.2.2.
show port priority-queue [priority]
Syntax Description
Command Defaults
If priority is not specified, all priority queue information will be displayed.
Command Mode
Read-Only.
Example
This example shows how to display priority queue information for ge.2.1. In this case, the frames
shown with a priority of 0 or 3 are transmitted according to the transmit priority queue of 1 (the
second lowest transmit priority); frames with 1 or 2 priority, at the lowest transmit priority of 0;
frames with priority 4 and 5 are in transmit priorty 2; and frames with priority 6 and 7 are in transmit
priority 3:
priority (Optional) Displays queue levels for a specific priority
value.
B2(su)->show port priority-queue ge.2.1
Port P0 P1 P2 P3 P4 P5 P6 P7
--------- -- -- -- -- -- -- -- --
ge.2.1 1 0 0 1 2 2 3 3