Specifications

Differentiated Services Configuration Command Set
Assigning Policy Profiles to Service Ports
SecureStack B2 Configuration Guide 7-25
7.3.4.3 set diffserv service
Use this command to add or remove a Diffserv policy to incoming traffic on one or more ports.
set diffserv service {add | remove} {in } port-string policyname
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to apply the Diffserv policy named “admin” to incoming traffic on ports
ge1.1-10:
add | remove Adds or removes the specified policy.
in Adds or removes the specified policy to incoming traffic.
port-string Specifies the port(s) to which this policy configuration will
be applied.
policyname Specifies the policy name to be added to or removed from
port traffic.
B2(rw)->set diffserv service add in ge.1.5 admin