Specifications

Differentiated Services Configuration Command Set
Configuring Diffserv Policy Profiles and Assigning Classes
7-18 SecureStack B2 Configuration Guide
7.3.3.4 set diffserv policy class
Use this command to add or remove a Diffserv class to a specified policy. Once added, policy
profile(s) will be active for the specified class.
set diffserv policy class {add | remove} policyname classname
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to add the “system” class to the “admin” policy profile:
NOTE: Class must be added to a policy using this command before policy profile
parameters, such as bandwidth, marking and policing, can be configured.
add | remove Adds or removes the specified class.
policyname Specifies the policy name to be associated with the class.
classname Specifies a class name to add or remove.
B2(rw)->set diffserv policy class add admin system