Specifications

Differentiated Services Configuration Command Set
Configuring Diffserv Policy Profiles and Assigning Classes
SecureStack B2 Configuration Guide 7-13
7.3.2.6 set diffserv class rename
Use this command to change the name of a Diffserv class.
set diffserv class rename classname newclassname
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to rename the Diffserv “admin” class to “system”:
7.3.3 Configuring Diffserv Policy Profiles and Assigning Classes
Purpose
To review, create, and configure Diffserv policy profiles and assign classes.
Commands
The commands used to review, create, and configure Diffserv policy profiles and assign classes are
listed below and described in the associated section as shown.
• show diffserv policy (Section 7.3.3.1)
• set diffserv policy create (Section 7.3.3.2)
• set diffserv policy delete (Section 7.3.3.3)
• set diffserv policy class (Section 7.3.3.4)
classname Specifies the class name previously set for this new
Diffserv class.
newclassname Specifies a new class name.
B2(rw)->set diffserv class rename admin system