Specifications

Differentiated Services Configuration Command Set
Globally Enabling or Disabling Diffserv
SecureStack B2 Configuration Guide 7-3
7.3.1.1 set diffserv adminmode
Use this command to globally enable or disable Diffserv on the device. By default, this function is
disabled at device startup.
set diffserv adminmode {enable | disable}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to enable Diffserv:
enable | disable Enables or disables Diffserv.
B2(rw)->set diffserv adminmode enable