Specifications

VLAN Configuration Command Set
Enabling/Disabling GVRP (GARP VLAN Registration Protocol)
6-36 SecureStack B2 Configuration Guide
6.3.7.2 show garp timer
Use this command to display GARP timer values for one or more ports.
show garp timer [port-string]
Syntax Description
Command Defaults
If port-string is not specified, GARP timer information will be displayed for all
ports.
Command Mode
Read-Only.
Example
This example shows how to display GARP timer information on Fast Ethernet ports 1 through 10
in unit 1:
port-string (Optional) Displays GARP timer information for specific
port(s). For a detailed description of possible port-string
values, refer to Section 3.1.1.
NOTE: For a functional description of the terms join, leave, and leaveall timers, refer to the
standard IEEE 802.1Q documentation, which is not supplied with this device.
B2(rw)->show garp timer fe.1.1-10
Port based GARP Configuration: (Timer units are centiseconds)
Port Number Join Leave Leaveall
----------- ---------- ---------- ----------
fe.1.1 20 60 1000
fe.1.2 20 60 1000
fe.1.3 20 60 1000
fe.1.4 20 60 1000
fe.1.5 20 60 1000
fe.1.6 20 60 1000
fe.1.7 20 60 1000
fe.1.8 20 60 1000
fe.1.9 20 60 1000
fe.1.10 20 60 1000