Specifications

VLAN Configuration Command Set
Setting the Host VLAN
SecureStack B2 Configuration Guide 6-27
6.3.5 Setting the Host VLAN
Purpose
To configure a host VLAN that only select devices are allowed to access. This secures the host port
for management-only tasks.
Commands
The commands needed to configure host VLANs are listed below and described in the associated
section as shown.
• show host vlan (Section 6.3.5.1)
• set host vlan (Section 6.3.5.2)
• clear host vlan (Section 6.3.5.3)
NOTE: The host port is the management entity of the device.