Specifications

Startup and General Configuration Summary
Factory Default Settings
2-2 SecureStack B2 Configuration Guide
Does not apply to MATRIX E7.
EAPOL authentication
mode
When enabled, set to auto for all ports.
GARP timer Join timer set to 20 centiseconds; leave timer set to 60 centiseconds;
leaveall timer set to 1000 centiseconds.
GVRP Globally enabled.
IGMP Disabled. When enabled, query interval is set to 260 seconds and
response time is set to 10 seconds.
IP mask and gateway Subnet mask set to 0.0.0.0; default gateway set to 0.0.0.0
IP routes No static routes configured.
Jumbo frame support Disabled on all ports.
Link aggregation
admin key
Set to 32768 for all ports.
Link aggregation flow
regeneration
Disabled.
Link aggregation
system priority
Set to 32768 for all ports.
Link aggregation
outport algorithm
Set to DIP-SIP.
Lockout Set to disable Read-Write and Read-Only users, and to lockout the
default admin (Super User) account for 15 minutes, after 3 failed
login attempts,
Logging Syslog port set to UDP port number 514. Logging severity level set
to 6 (significant conditions) for all applications.
MAC aging time Set to 300 seconds.
MAC locking Disabled (globally and on all ports).
Passwords Set to an empty string for all default user accounts. User must press
ENTER at the password prompt to access CLI.
Table 2-1 Default Device Settings (Continued)
Device Feature Default Setting