Specifications

SecureStack B2 Configuration Guide 2-1
2
Startup and General Configuration
This chapter describes factory default settings and the Startup and General Configuration set of
commands.
2.1 STARTUP AND GENERAL CONFIGURATION SUMMARY
At startup, the SecureStack B2 device is configured with many defaults and standard features. The
following sections provide information on how to review and change factory defaults, and how to
customize basic system settings to adapt to your work environment.
2.1.1 Factory Default Settings
Table 2-1 lists default settings for SecureStack B2 switch operation.
Table 2-1 Default Device Settings
Device Feature Default Setting
CDP discovery
protocol
Auto enabled on all ports.
CDP authentication
code
Set to 00-00-00-00-00-00-00-00
CDP hold time Set to 180 seconds.
CDP interval Transmit frequency of CDP messages set to 60 seconds.
Community name Public.
EAPOL Disabled.