Specifications

VLAN Configuration Command Set
Reviewing Existing VLANs
6-6 SecureStack B2 Configuration Guide
are listed as untagged ports. There are no forbidden ports (prevented from transmitted frames) on
VLAN 1:
Table 6-1 provides an explanation of the command output.
B2(rw)->show vlan 1
VLAN: 1 NAME: DEFAULT VLAN Status: Enabled
VLAN Type: Permanent
Egress Ports
host.0.1, fe.1.1-10, ge.2.1-4, fe.3.1-7,
Forbidden Egress Ports
None.
Untagged Ports
host.0.1, fe.1.1-10, ge.2.1-4, fe.3.1-7,
Table 6-1 show vlan Output Details
Output What It Displays...
VLAN VLAN ID.
NAME Name assigned to the VLAN.
Status Whether it is enabled or disabled.
VLAN Type Whether it is permanent (static) or dynamic.
Egress Ports Ports configured to transmit frames for this VLAN.
Forbidden Egress
Ports
Ports prevented from transmitted frames for this VLAN.
Untagged Ports Ports configured to transmit untagged frames for this VLAN.