Specifications

VLAN Configuration Command Set
Reviewing Existing VLANs
SecureStack B2 Configuration Guide 6-5
6.3.1.1 show vlan
Use this command to display all information related to one or more VLANs.
show vlan [static] [vlan-list] [portinfo [vlan vlan-list | vlan-name] [port
port-string]]
Syntax Description
Command Defaults
If no options are specified, all information related to static and dynamic VLANs
will be displayed.
Command Mode
Read-Only.
Example
This example shows how to display information for VLAN 1. In this case, VLAN 1 is named
“DEFAULT VLAN” and it is enabled to operate. Ports allowed to transmit frames belonging to
VLAN 1 are listed as egress ports. Ports that won’t include a VLAN tag in their transmitted frames
static (Optional) Displays information related to static VLANs.
Static VLANs are manually created using the set vlan
command (Section 6.3.2.1), SNMP MIBs, or the WebView
management application. The default VLAN, VLAN 1, is
always statically configured and can’t be deleted. Only
ports that use a specified VLAN as their default VLAN
(PVID) will be displayed.
vlan-list (Optional) Displays information for a specific VLAN or
range of VLANs.
portinfo (Optional) Displays VLAN attributes related to one or more
ports.
vlan vlan-list |
vlan-name
(Optional) Displays port information for one or more
VLANs.
port port-string (Optional) Displays port information for one or more ports.