Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Port Parameters
5-40 SecureStack B2 Configuration Guide
5.2.2.10 set spantree adminedge
Use this command to set the edge port administrative status on a Spanning Tree port.
set spantree adminedge port-string {true | false}
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to set fe.1.11 as an edge port:
port-string Specifies the edge port. For a detailed description of
possible port-string values, refer to Section 3.1.1.
true | false Enables (true) or disables (false) the specified port as a
Spanning Tree edge port.
B2(rw)->set spantree adminedge fe.1.11 true