Specifications

Spanning Tree Configuration Command Set
Reviewing and Setting Spanning Tree Port Parameters
5-32 SecureStack B2 Configuration Guide
5.2.2.2 clear spantree portadmin
Use this command to reset the default Spanning Tree admin status to enable on one or more ports.
clear spantree portadmin port-string
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to reset the default Spanning Tree admin state to enable on fe.1.12:
port-string Resets the default admin status on specific port(s). For a
detailed description of possible port-string values, refer
to Section 3.1.1.
B2(rw)->clear spantree portadmin fe.1.12