Specifications

Device Management Methods
1-2 SecureStack B2 Configuration Guide
• Configure ports to prioritize and assign a VLAN or Class of Service to incoming frames based
on Layer 2, Layer 3, and Layer 4 information.
• Configure the device to operate as a Generic Attribute Registration Protocol (GARP) device to
dynamically create VLANs across a switched network.
• Redirect frames according to a port or VLAN and transmit them on a preselected destination
port.
• Configure Spanning Trees.
• Clear NVRAM.
• Configure security methods, including 802.1X, RADIUS, SSHv2, and MAC locking.
1.2 DEVICE MANAGEMENT METHODS
The SecureStack B2 device can be managed using the following methods:
• Locally using a VT type terminal connected to the console port.
• Remotely using a VT type terminal connected through a modem.
• Remotely using an SNMP management station.
• In-band through a Telnet connection.
• In-band using Enterasys Networks’ NetSight® management application.
• Remotely using WebView ™, Enterasys Networks’ embedded web server application.
The SecureStack B2 Installation Guide provides setup instructions for connecting a terminal or
modem to the SecureStack B2 device.