Specifications

SecureStack B2 Configuration Guide 1-1
1
Introduction
This chapter provides an overview of the SecureStack B2’s unique features and functionality, an
overview of the tasks that may be accomplished using the CLI interface, an overview of ways to
manage the device, and information on how to contact Enterasys Networks for technical support.
1.1 SECURESTACK B2 CLI OVERVIEW
Enterasys Networks’ SecureStack B2 CLI interface allows you to perform a variety of network
management tasks, including the following:
• Assign IP address and subnet mask.
• Select a default gateway.
• Assign a login password to the device for additional security.
• Download a new firmware image.
• Designate which network management workstations receive SNMP traps from the device.
• View device statistics.
• Manage configuration files.
• Assign ports to operate in the standard or full duplex mode.
• Control the number of received broadcasts that are switched to the other interfaces.
• Set port configurations and port-based VLANs.
Important Notice
Depending on the firmware version you are using, some features described in this document may not be
supported. Refer to the Release Notes shipped with the your device to determine which features are
supported.