Specifications

SNMP Configuration Command Set
Configuring SNMP Notification Parameters
4-56 SecureStack B2 Configuration Guide
4.3.7.3 clear snmp notify
Use this command to clear an SNMP notify configuration.
clear snmp notify notify
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to clear the SNMP notify configuration for “hello”:
About SNMP Notify Filters
Profiles indicating which targets should not receive SNMP notification messages are kept in the
NotifyFilter table. If this table is empty, meaning that no filtering is associated with any SNMP
target, then no filtering will take place. “Traps” or “informs” notifications will be sent to all
destinations in the SNMP targetAddrTable that have tags matching those found in the NotifyTable.
When the NotifyFilter table contains profile entries, the SNMP agent will find any filter profile
name that corresponds to the target parameter name contained in an outgoing notification message.
It will then apply the appropriate subtree-specific filter when generating notification messages.
notify Specifies an SNMP notify name to clear.
B2(rw)->clear snmp notify hello