Specifications

SNMP Configuration Command Set
Configuring SNMP Target Parameters
SecureStack B2 Configuration Guide 4-45
4.3.5.3 clear snmp targetparams
Use this command to clear the SNMP target parameter configuration.
clear snmp targetparams targetParams
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to clear SNMP target parameters named “v1ExampleParams”:
targetParams Specifies the name of the parameter in the SNMP target
parameters table to be cleared.
B2(rw)->clear snmp targetparams v1ExampleParams