Specifications

SNMP Configuration Command Set
Configuring SNMP Target Parameters
4-40 SecureStack B2 Configuration Guide
4.3.5.1 show snmp targetparams
Use this command to display SNMP parameters used to generate a message to a target.
show snmp targetparams [targetParams] [volatile | nonvolatile | read-only]
Syntax Description
Command Defaults
• If targetParams is not specified, entries associated with all target parameters
will be displayed.
• If not specified, entries of all storage types will be displayed.
Command Mode
Read-Only.
targetParams (Optional) Displays entries for a specific target
parameter.
volatile |
nonvolatile |
read-only
(Optional) Displays target parameter entries for a specific
storage type.