Specifications

Link Aggregation Control Protocol (LACP)
Configuring Broadcast Suppression
SecureStack B2 Configuration Guide 3-55
3.5.5.2 set broadcast
Use this command to enable or disable broadcast suppression on the device. When enabled, which
is the default setting, broadcast packets will be limited to 14,880 per second on all device ports.
set broadcast {enable | disable}
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to enable broadcast suppression :
enable | disable Enables or disables broadcast suppression.
B2(rw)->set broadcast enable