Specifications

Link Aggregation Control Protocol (LACP)
Configuring Link Aggregation
SecureStack B2 Configuration Guide 3-45
3.5.4.7 clear lacp static
Use this command to remove specific ports from a Link Aggregation Group.
clear lacp static lagportstring port-string
Syntax Description
Command Defaults
None.
Command Mode
Read-Write.
Example
This example shows how to remove fe.1.6 from the LAG of aggregator port 6:
lagportstring Specifies the LAG aggregator port from which ports will
be removed.
port-string Specifies the port(s) to remove from the LAG. For a
detailed description of possible port-string values, refer
to Section 3.1.1.
B2(rw)->clear lacp static lag.0.6 fe.1.6