Specifications

Link Aggregation Control Protocol (LACP)
Configuring Link Aggregation
3-40 SecureStack B2 Configuration Guide
Table 3-4 show lacp Output Details
Output What It Displays...
Aggregator LAG port designation. Each SecureStack B2 unit provides 6
virtual link aggregator ports, which are designated in the CLI
as lag.0.1 through lag.0.6. Once underlying physical ports
(i.e.; fe.x.x, ge.x.x) are associated with an aggregator port,
the resulting Link Aggregation Group (LAG) is represented
with a lag.x.x port designation.
Actor Local device participating in LACP negotiation.
Partner Remote device participating in LACP negotiation.
System Identifier MAC addresses for actor and partner.
System Priority System priority value which determines aggregation
precedence. Only one LACP system priority can be set on a
SecureStack B2 device, using either the set lacp asyspri
command (Section 3.5.4.3), or the set port lacp command
(Section 3.5.4.9)
.
Admin Key Port’s administratively assigned key.
Oper Key Port’s operational key, derived from the admin key. Only
underlying physical ports with oper keys matching the
aggregator’s will be allowed to aggregate.
Attached Ports Underlying physical ports associated with this aggregator.